Ask three electricians for a split-system price and you can get three very different answers. Usually that is because they are pricing three different jobs. Here is what actually changes the price of a split-system install in Bundaberg, so you can compare quotes properly.
1. The size of the unit
A bigger room needs more cooling capacity, and a bigger unit costs more to buy and can take more work to mount. Getting the size right matters more than most people think. Too small and it runs flat out all summer without keeping up. Too big and you have paid for capacity you do not need. Bryan helps you match the unit to the room before quoting.
2. Back-to-back, or a longer pipe run
The simplest install is a Back-to-back install A split-system install where the indoor and outdoor units sit on opposite sides of the same wall, so the pipe run is short and simple.: the indoor unit goes on one side of a wall and the outdoor unit sits directly behind it on the other side. The pipe run is short, there is little cutting, and the job is quick.
When the outdoor unit needs to go somewhere else, such as down the side of the house or away from a bedroom window, the pipes and cabling have to travel further. That means more materials, more ducting to cover the run, and more time. It is often worth it for a quieter bedroom or a tidier look, but it changes the price.
3. The wall you are mounting on
Brick, block, weatherboard and fibro all mount differently. Some walls need more work to get through cleanly and seal properly. Where the outdoor unit sits matters too: on the ground, on brackets, or up high.
4. Your switchboard
Every Split system An air conditioner with two parts: an indoor unit on the wall inside, and an outdoor unit with the compressor outside, joined by refrigerant pipes and cabling. needs a safe supply. Bryan checks your Switchboard The panel where power enters your home and is split into circuits. It holds your main switch, circuit breakers and safety switches. as part of the quote. Many older Bundaberg homes have boards with no spare room, or no safety switches at all. If the board needs work to carry the new load safely, Bryan tells you before anything starts and it is included in the fixed price.
5. Supply and install, or install only
If you have already bought a unit, Bryan can install it. If you would rather he supplies it, he can do that too. Either way, the quote tells you exactly what is included.
Why simple installs can be priced on the spot
A straightforward back-to-back install on a standard wall, with a switchboard that can take the load, has very few unknowns. That is why Bryan can usually price those on the spot. Anything more involved gets a fixed-price quote after a chat or a site visit, before any work starts. No surprise extras get added without you saying yes first.
Comparing quotes
When you line quotes up, check they include the same things: the unit, the pipe run, the electrical work, any switchboard changes, and the clean-up. A cheaper quote that leaves out the electrical side can end up costing more. More on that in why the cheapest electrician quote often costs more.
Want a price for your place? See air conditioning installation in Bundaberg or send Bryan a quote request with a few photos of the wall and your switchboard.